Views: 1 Author: Site Editor Publish Time: 2022-01-21 Origin: Site
The aging of rubber pipes is a headache. Without you, there are countless losses caused by rubber aging. Many of them can be avoided or reduced, but they don't know the maintenance methods of rubber hoses. So let me tell you how to maintain the rubber hose in use.
The first is regular inspection
The aging of rubber pipes is a slow and long-term process. The problems caused by aging do not appear all at once, often bit by bit. Therefore, we must timely check the wear degree of the outer surface of the rubber pipe and the wear degree of the joint, and deal with the problems in time to avoid greater problems.
Cleaning of rubber hose
Due to the working environment, the outer surface of the rubber pipe may be attached with a layer of dust or other substances after working for a period of time, and some of these foreign matters will corrode the rubber pipe. In the long run, it will not only affect the performance of the rubber pipe, but also shorten the service life. In addition, after using the hose, the interior of the hose shall be cleaned and dried in time to avoid the corrosive effect of residual materials on the rubber layer in the hose.
Take some proper protective measures for the hose
During the use of the hose, we can take certain protective measures to protect the hose. For example, the washing water pipe in a car wash shop is often dragged around on the ground, and these friction will constantly wear the outer surface of the rubber hose. At this time, the rubber hose can be sleeved with a rubber hose protective sleeve. This protective sleeve is generally made of PP material, which has good temperature resistance, wear resistance and corrosion resistance, and can effectively prolong the service life of the rubber hose. Some rubber hoses work for a long time in a high temperature environment, which can be covered with a layer of temperature insulation sheath to reduce the impact of high temperature on the rubber hose.
If you want to know more about spiral protective covers and other products, Xiaobian suggests that you can come to our parlmu company. We have focused on the production of EPDM EPDM low-pressure water pipe, NBR nitrile low-pressure oil pipe, backing plate and other rubber and plastic products for 30 years. We have 30 years of production experience and send samples free of charge. We can customize products according to your requirements. Welcome to inquire.
