How to effectively protect water pipes?

Everyday life, everyone will have such a misunderstanding, usually think that the quality of the water pipe is good, and then install it firmly, you can sit back and relax. In fact, the vast majority of water pipes must be protected from sun protection in winter and anti-freeze measures in winter to ensure the normal service life of water pipes. So how can we protect the water pipes well?

First, install a protective cover (most important)

Water pipes not only have to withstand the long-term sun exposure in summer, but also endure the extremely cold winter ice, which will directly damage the life of the water pipe. For example: an ordinary white PPR water pipe, if used as an outdoor wall mounted pipe, will only fade and yellow when the pipe is exposed for just two summers. Oxygen will also infiltrate the pipe inside the pipe. This will cause the inner wall of the pipe to breed various microorganisms, grow moss, pollute the water quality, and may affect our health.

Therefore, it is very necessary to use a water pipe protector.

Second, cleaning the water pipe

Even if the water pipe is not blocked, after a few years of use, if the water flow is slow, or the floor heating, the radiator is not hot, etc., it is best to clean the water pipe as a whole. When cleaning the water pipe, use a floor heating washer and an air compressor to connect the pipeline, and clean the water pipe system twice in a row, and discharge the sewage flowing out from the water pipe directly into the water outlet.

Third, install the filter

Among the daily protection measures for water pipes, the way that is easily overlooked is to clean the water. For example, on the main pipe of the water pipe, install a filter with a table or a pre-filter. The filter in these two accessories can filter out impurities in the water. The water quality is sanitation, the water does not block the pipeline, and the water pipe is also a good protection.