How to install the spiral guard

Method 1: start from the middle part and rotate to both ends

1. Wrap the middle part of the rubber hose (wire, cable) around the middle part of the spiral guard, starting from the wound middle part and winding to the end of the rubber hose (wire, cable).

2. Position one end of the rubber hose (wire and cable) at the connection of the hose (wire and cable) after winding the spiral guard.After positioning, reverse the spiral guard and loosen it, then you can move freely and start winding from the middle part to the other end.

3. Wrap both ends of the spiral protective sleeve around the outside of the rubber hose (wire, cable) and install it.

Note: multiple wires and cables can be branched for installation and use.

Method 2: turn from one end to the other end

1. Wrap one end of the rubber hose (wire, cable) around one end of the spiral guard.

2. The positioning.

3. After positioning, start winding to the other end. After winding all the spiral guard on the outside of the rubber hose (wire, cable), the installation is completed, and the parameters